Star Wars Themed Aztec calendar - Wall Panel Décor
Star Wars Themed Aztec calendar - Wall Panel Décor is backordered and will ship as soon as it is back in stock.
Size Guide
Size Guide
Measurements are based on the longest dimension(top/bottom or left/right). Please contact us with any concerns before placing your order.
Please click on the link below for an image showing how our wooden Craft Shapes are measured.
Sealing MDF
Sealing MDF
Sealing MDF is not 100% necessary for crafting, but LaserworksUK highly recommended that you do so, as this will allow you to get the best possible finish when decorating your crafts. We do recommend that you seal all the mdf surfaces and especially the edges, using a diluted pva glue or primer prior to painting.
You can use most paints and sprays to decorate including Furniture paints, Emulsions and Acrylic sprays and Acrylic paints.
Acrylic paints will give you the best possible finish it is easy to apply and mix colours. A little paint goes a long way.
Make sure you sand between coats with a 240 grit sandpaper or higher.
Application with a foam brush or roller will give you the best finish with outstanding results.
Shipping & Delivery!
Shipping & Delivery!
Delivery is via Royal Mail's 24 or 48 hour services. Delivered is normally within 1 to 2 working days. Orders are shipped the same day if you order before 2pm, but at busy times this can take up to 24 hours. Orders placed after the cut off time will be shipped the next working day. If you have purchased a bespoke item? then at busy times your order may get slightly delayed, as these are not off-the-shelf items as they are made to order. Please contact us if you have any concerns...
Further Information
For information about all our delivery options we offer see full delivery details.
Description
Description
Star Wars themed Aztec calendar - Wall Panel Décor
Our Star Wars theme and Ironman Aztec calendar is cut at 600mm diameter and made from 18mm thick Medite MDF. These items are just for demonstration purposes and are not for sale, They have been marked as out of stock items.
This is only to show you what we can make using our cnc machine. If you have an item that you need making then get in touch and we will make it for you.
This has been cut on a CNC router so there are no burnt edges to decorate over, it has a smooth finish and ready to take paint once sealed.
Decorated using Mdf Sealer, Spray paints, Rub n Buff and Varnish.
Guide below for sealing mdf prior to decorating.
Sealing MDF: Medite MDF is used for many crafting projects. It is an easy to work material which takes paints, stains and varnish very well. Unfortunately MDF swells with moisture and noticeably with the application of acrylic (water based) paints if the surfaced are not sealed before painting, leaving you with a fluffy surface which can be very difficult to put right.
Seal MDF to Prevent Distortion: To prevent MDF from swelling, you should seal the edges and the top and bottom surfaces before applying acrylic (water based) paint coatings. If your crafting project will be anywhere near high humidity or water, it should be primed and sealed on all edges to make sure it does not swell or distort, even a small amount of water seeping onto your MDF project can cause it to swell noticeably if they have not been sealed.
Seal All MDF Edges: The edges of MDF boards absorb paint heavily. Make sure to seal these edges. You can use an acrylic paint sealer or Sealing MDF with a PVA Glue, white wood glue. To seal the edges you can paint a layer of thin PVA "white wood glue" over the edge with a glue brush or a pump spray bottle, making sure the glue layer is as even as possible, with no build up at the edges. The sealed MDF edge can be sanded once dry, but you should only give it a light sanding to flatten the sealing agent used.
Seal Top and Bottom Surfaces: Seal the MDF with PVA Glue. You can seal MDF surfaces with a thin layer of diluted PVA glue. Most PVA-based wood glues require dilution with water to get a thin sealing layer on your MDF. Thin PVA glues designed for paper work well if applied with a roller.
We only use FSC® Certified and CE Marked MDF. This is Manufactured to BS - EN622-5 – E1 Formaldehyde emission.
MDF Cut Edges
MDF Cut Edges
Laser Cutting: The laser cutting process will leave a medium brown finish to the edges of the MDF after the laser cutting process has finished. Any laser processing marks to the top and bottom of the mdf can be removed by using a light grade sandpaper or by simply painting over them.
CNC Cutting: If your item was cut on one of our CNC router machine you will have no burnt edges, the edges will be clean and ready for you decorate.
Payment & Security
Payment methods
We use Shopify and PayPal to provide safe and secure processing for your payments.. They are a reputable and secure platform for making online payments. We do not have access to your credit card information or store any of your credit card details.
